State-wide location display of maximum downhole gold geochemistry

State-wide location display of maximum downhole gold geochemistry

Required Elements
Au
The SARIG maximum downhole geochemistry data package is an extract from SA Geodata, originally sourced from the Department for Energy and Mining, its predecessors, and from various mining/mineral exploration companies....

Required Elements
Au

The SARIG maximum downhole geochemistry data package is an extract from SA Geodata, originally sourced from the Department for Energy and Mining, its predecessors, and from various mining/mineral exploration companies. Geochemistry values held in SA Geodata are collected from drill core and rock sample analysis, but only down hole data is used in the derived product (i.e. no surface samples).
The process to extract and transform measured single element data to maximum downhole geochemistry data from SA Geodata is summarised below.

Required Columns
From the drill hole chem data tables in SA Geodata the following columns are required: SAMPLE_NO, DRILLHOLE_NO, DRILLHOLE_NAME, DH_DEPTH_FROM, DH_DEPTH_TO, CHEM_CODE, CHEM_VALUE_TIMES_CRUSTAL, CHEM_VALUE, CHEM_UNIT, ANALYSIS_METHOD, LATITUDE_GDA2020, LONGITUDE_GDA2020, EASTING_GDA2020, NORTHING_GDA2020, ZONE_GDA2020

Selection Method
For the above table columns:
-SELECT (SAMPLE_NO, DRILLHOLE_NO, CHEM_CODE, CHEM_UNIT, CHEM_VALUE) where DRILLHOLE_NO is not null, CHEM_CODE = 'Au', CHEM_UNIT is not in ('cps' 'NOINIT', 'us/cm' 'X') and CHEM_METHOD is not ('BLEG', 'FA','FAS1', 'FAS1?', 'FAS2', 'FIRE', 'FAS4', 'AqReg/ C', 'ANA FAS1', 'ANA FAS', '1', 'GLS FAS', 'PAR1', 'P-XRF', 'XRFInnovX', 'XRFNiton', 'UKN', 'ES3', 'ES1', 'ES4', 'ES2', 'ES6', 'ME-SCRPH22', 'LW500', 'MET5B', 'MET1M', 'MET2A', 'ORE5/5', 'O1','R3/3', 'ARM40', 'CMB', '100', '207','2I', '402','A1', 'A1/1.2', 'A2','A7/1', 'A7/2', 'A7/3', 'AA','C1', 'C3', 'C3/3', 'CHEC', 'CHEM', 'CIP', 'H1', 'H3', 'I2', 'I3', 'IC',  'IC58', 'ICP', 'ICP', 'ICP/WCM', 'ICP1', 'ICP2', 'ICP5', 'ICP8', 'ICPL', 'LOI', 'MS', 'MS53', 'MSID', 'O', 'PAD', 'PM', 'PM21', 'QEM', 'RF1', 'SPEC', 'SPECT', 'V', 'VAP/HYD', 'X1', 'D3(a)', 'EMISSPECT', 'Scan/201', 'C2', 'C1/C2', 'Electrode', 'CRUCIBLE', 'SUBLIM', 'D2(a)', 'D5/50', 'K4/1', 'E4', 'D5/20', 'D5720', 'A6/3', 'ROC', 'A1/1', 'SPEC.', 'B1', 'C3/1' ,'DITHIOL', 'Scan', 'Dithiol', 'Gallein', 'Spectro.', 'A1/1, 2',  'A1/1,2', 'X3', 'A2/4', 'ALS ?', 'A1/2,A2/2', 'AMDEL C1/2', 'ALS CODE 1', 'ALS CODE 2', 'ALS CODE5B', 'ALS CODE 8', 'COM ?', 'ACS ?', 'SPECTRO', 'AMD I1 ICP', 'AMD CODEB1', 'AMD ?', 'MASSPEC', 'SRS', 'GS201', 'SPECSCAN', 'ACSA ?', 'AMD A1/1', 'AMD C1', 'AMD C1/C2', 'AMD ICP1', 'AMD C3/3', 'AMD J3/2', 'AMD K4/2', 'AMD SQSCAN', 'AMD X1', 'SEL ICP1', 'SEL SP1', 'SPEC SCAN', 'GI211', 'TBE', 'ANA UNSPEC', 'ORE2/1', 'ICP3', 'CALC', 'GLS B/HYD', 'AMD ICP2', 'COM FAS1', 'COM ROC1', 'MET7A', '"A1/1,2"', 'E1052', 'V988', 'EVAP', 'FIA', 'FICR', 'FIS', 'GCMS', 'Labmeter', 'Ncal', 'PO', 'TitrA', 'TOCAA', 'IND6F', 'AG4', 'EC', 'FP', 'PLA', 'RAD', 'UCalGam', 'UCalPfn', 'LST', 'EXPL 110', 'EXPLGR135G', 'METHOD 1', 'METHOD 3', 'ARN-10', 'METHOD 2', 'ARSTEP', 'U5', 'AR101', 'AR002', 'AES', 'IC3M', 'IC3R')

Transformations
Laboratory results are commonly presented in ppb, ppm, g/T, u/L and mg/L.
All gold values then need to be converted to ppm. With the CHEM_Code ='Au', select (CHEM_UNIT)
-When 'ppb' then [CHEM_VALUE] / 1000
-When 'g/T' then [CHEM_VALUE] - no conversion necessary
-When 'ug/L' then [CHEM_VALUE] / 1000
-When 'mg/L' then [CHEM_VALUE] - no conversion necessary

All ppm values are then normalised to times_average_crustal_abundance [CHEM_VALUE_TIMES_CRUSTAL], which is taken from the following reference:
Rudnick, R.L. and Gao, S. (2014). 4.1 - Composition of the continental crust. Treatise on Geochemistry (Second Edition), Vol. 4, p. 1-51. https://doi.org/10.1016/B978-0-08-095975-7.00301-6
-Au [PPM_VALUE] / 0.0013

For example, using calculated Au value 0.01 ppm, normalisation is [0.01] / 0.0013 = 7.69
This calculated value can now be used in the max value selection criteria.

Max Value Selection Criteria
Once all the units are converted and normalised to times_average_crustal_abundance, the max value for each drill hole is selected. 
This can be achieved using groupby [DRILLHOLE_NO] and then select Max VALUE or Max times_average_crustal_abundance.
# CHEM_VALUE cutoff values have been applied to gold ppm data for optimal display and usage in SARIG. These limits are:
CHEM_CODE_NORM = 'Au' and CHEM_VALUE_NORM >= 0.001

More +