RB 2017/00044 PACE Copper Coompana Drilling Project: Drillhole CDP007 preliminary field-data report.
Published: 01 Dec 2017 Created: 25 Nov 2024 Revised: 27 Nov 2024

The Geological Survey of South Australia, in partnership with Geoscience Australia, is undertaking a regional pre-competitive geoscience research drilling program in the far west of South Australia called the Coompana Drilling Project. The...

The Geological Survey of South Australia, in partnership with Geoscience Australia, is undertaking a regional pre-competitive geoscience research drilling program in the far west of South Australia called the Coompana Drilling Project. The Coompana Province, located between the western Gawler Craton to the east, the Musgrave Province to the north and the Madura Province to the west, is one of the least understood and explored geological provinces remaining on the Australian continent. Bedrock in the region is completely covered by Neoproterozoic to Cenozoic sediments, and there are no known basement exposures. Up to 18 new drillholes were planned as part of this project to intersect as many of the different geophysical domains as possible, as delineated from the recently acquired Coompana airborne magnetic/radiometric survey and the Coompana regional gravity survey. The primary objective of the Coompana Drilling Project is to obtain high quality drill core samples from the untested basement units beneath the Nullarbor Plain. The outcome of the Coompana Drilling Project will be to provide our stakeholders with new pre-competitive data and a geological framework that more clearly defines the geology and prospectivity in this region. This report provides the first release of the preliminary data collected on-site during the drilling of drillhole CDP007. This compilation includes well completion information, location and site access data, results of pre-drilling cover geophysics and depth estimates as well as the field geological logs and acquired down-hole geophysical data. CDP007 is located in a geophysical zone that is characterised by a well-developed east-northeast striking grain that lies along strike to the west-southwest of drillhole CDP006. This zone can be traced to the south, where it appears to grade into the foliated crust targeted by planned drillsite CP03. Just to the north of CDP007 is a large elongate (~75 km long by 20 km wide) magnetic pluton that is aligned parallel to the east-northeast-striking grain. Rather than the foliated rock, CDP007 targeted a small intrusive feature that has strong remanent magnetism. This magnetic feature is <1 km long and <0.5 km wide, with the long axis aligned in a north-south direction.

More +

About this record

Record No d20011715
Topic Geoscientific Information
Type of Resource Document
Category Type
Document Type Exploration Initiative - Collaborative Drilling
Contributor DPC Resources and Energy Group. Geological Survey of South Australia;South Australia’s 4D Geodynamic and Metallogenic Evolution Team
Sponsor Geological Survey of South Australia. Regional Geology and Mapping Team
Tenement
Tenement Holder
Operator
Geological Province Coompana Province
Mine Name
Stratigraphy
Commodity industrial material
Notes
Notes: Hole CDP007 was drilled to a total depth of 380.5 m over the 8 day period 11/8 - 18/8/2017. An initial precollar through the Nullarbor Limestone was RC drilled to 180.4 m and cased off, then was followed by rotary mud precollar drilling...

Notes: Hole CDP007 was drilled to a total depth of 380.5 m over the 8 day period 11/8 - 18/8/2017. An initial precollar through the Nullarbor Limestone was RC drilled to 180.4 m and cased off, then was followed by rotary mud precollar drilling through the remainder of the cover and into basement, with another casing string set at 252 m. HQ3 diamond drilling commenced from this point and was continued for 128.5 m until reaching TD. Geographic Locality: Eastern Nullarbor Plain;Eyre Highway;Border Village;Nullarbor National Park;2017 PACE Copper Coompana Drilling Project Microgravity Surveys [part] Doc No: RB 2017/00044 Drillhole: CDP007;(299061) Drillhole Unit No: 4735 00010

More +

Language English
Metadata Standard ISO 19115-3

Citations

Use constraints License
License Creative Commons Attribution 4.0
Persistent identifier https://pid.sarig.sa.gov.au/document/d20011715
Citation Dutch, R.A.;Jagodzinski, E.A.;Pawley, M.J.;Wise, T.W.;Tylkowski, L.;Lockheed, A.;McAlpine, S.R.B.;Heath, P.J. 2017. RB 2017/00044 PACE Copper Coompana Drilling Project: Drillhole CDP007 preliminary field-data report. Exploration Initiative - Collaborative Drilling
https://pid.sarig.sa.gov.au/document/d20011715

Technical information

Status
Maintenance and Update Frequency
Geographic Reference GDA2020 (EPSG:7844)
Geo bounding box {"type":"Polygon","coordinates":[[[129,-31.5],[129.5,-31.5],[129.5,-31],[129,-31],[129,-31.5]]]}
Purpose

                    
                    

                    
                  
Lineage