Carbonate carbon and to a lesser extent organic carbon are persistent in their pattern of vertical distribution regardless of structural position. Detailed correlations may be made across the SE of the basin. Idealised chemostratigraphic successions...

24 selected anticlinal and fault trap prospects in the Cooper Basin, that do not include certain prospects which are small or which contain discovered but as yet undefined fields, have been evaluated by the SADM Petroleum Geology Section using a new...

Continued investigations to identify relationships between organic carbon content and trace metal content confirmed conventionally defined rock units in the Basin exhibit characteristic trace element signatures. In Big Lake 23, the carbonaceous shale...

A complete and consistent set of interpreted formation tops has been compiled for the Cooper Basin, representing wireline log picks that are based on criteria designed to reflect regionally mappable lithological breaks. In addition, some units were...

The objectives of this study were to establish permeability and effective porosity limits for a definition of tight gas, and to determine selection criteria for tight gas reservoir development candidates. The study forms Part 1 of a program to define...

Contents comprise research grant applications and progress reports to SENRAC for the NCPGG Cooper Basin Project, jointly funded by SENRAC and NERDDP, entitled Factors relating to the development of porosity and permeability in Permian sandstones in...

There is no abstract created for this record

Contains results of the general maceral analysis and vitrinite reflectance studies performed on 15 composite drill cuttings samples taken from selected intervals between 3810 and 6540 feet depth.

Contains results of the general maceral analysis and vitrinite reflectance studies performed on 7 composite drill cuttings samples taken from selected intervals between 1380 and 6760 feet depth.

A sedimentary sequence of Permian age provides both the source and reservoirs for the major portion of the hydrocarbons discovered in the Cooper Basin. This sequence is composed of shales, siltstones, coals and sandstones, and in 1967 was named the...

Organic geochemical analyses were performed on 14 conventional core samples taken from the Epsilon, Murteree and Patchawarra formation intervals in Wancoocha 1 and on 3 similar samples from the Birkhead Formation in Wancoocha 4. The rock sample...

5 core plug samples from the Murta/Namur oil reservoir interval 4143-4182 feet KB in Nungeroo 1, 4 core plugs from the Patchawarra wet gas reservoir interval 6601-6652 feet KB in Garanjanie 2, and 3 core plugs from the Epsilon wet gas reservoir...

There is no abstract created for this record

Results of total organic carbon and Rock-Eval pyrolysis analyses for 15 drill cuttings samples from the depth interval 00 - 4490 feet KB.

There is no abstract created for this record

AIM:To integrate good quality new data into the regional seismic grid and mature known structural prospects and leads as potential gas drilling targets, plus explore virgin territory as part of a systematic long-term Vibroseis mapping project in the...

AIM: To mature several large structural leads, map possible stratigraphic traps on the flanks of regional highs and extend the regional Vibroseis coverage. METHODS: Survey dates: 10/4/79 - 23/11/79. Energy source: Vibroseis. CDP coverage: 1200%....

AIM:The 1978 Perigundi Seismic Survey was the fourth modern, digital Vibroseis survey conducted in the Cooper Basin, and was based on similar concepts to the 1973 Mudlankie, 1975 Tooroopie and 1976 Callamurra regional surveys, namely: 1) to further...

This report summarises basic data relating to the stratigraphic and geographic distribution, composition and recovery efficiency of Cooper Basin hydrocarbons. Their possible geological controls are discussed, with the aim of refining pre-drill...

Three core plug samples from the Birkhead Formation oil reservoir interval in Wancoocha 3 and Wancoocha 4 were subjected to special core analysis investigations of their electrical properties, after cleaning and pressure saturation with a simulated...